Polymers/Rubbers
Polymers
- Polypropylene (PP)
- Polyethylene (PE)
- Polyvinyl chloride (PVC)
- Polyethylene terephthalate (PET)
- Polystyrene (PS)
- Ethylene Vinyl Acetate (EVA)
- Polycarbonate (PC)
- Acrylonitrile butadiene styrene (ABS)
Rubbers
- Thermoplastic Elastomers (TPE)
- Thermoplastic Vulcanizates (TPV)
- Styrene Isoprene Styrene (SIS)
- Styrene Ethylene/ Butylene Styrene (SEBS)
- Thermoplastic Polyurethane (TPU)
- Thermoplastic Olefins (TPO)
- Nitrile Rubber (NBR)
- Styrene-butadiene Rubber (SBR)
- Poly Butadine Rubber (PBR)
- Ethylene Propylene Diene Monomer (EPDM)
PVC (Polyvinylchloride)
- SPVC (Suspension PVC)
- EPVC (Emulsion PVC)
Polystyrene
- EPS – Standard Grades
- EPS – Flame Resistant Grades
- PS – General Purpose Resin
- PS – High Impact Resin
Polyethylene
- HDPE – Blow Molding
- HDPE – Blow Film Extrusion
- HDPE – Extrusion Coating
- HDPE – Pipe Extrusion
- HDPE – Sheet Extrusion
- HDPE – Masterbatch
- HDPE – Injection Molding
- VestolenA – Pipe Extrusion
- LLDPE – Blown Film Extrusion
- LLDPE – Cast Film Extrusion
- LLDPE – Injection Molding
- LLDPE – Masterbatch
- LLDPE – Pipe Extrusion
- LLDPE – Sheet Extrusion
- LLDPE – Rotational Molding
- LDPE – Blown Film Extrusion
- LDPE – Cast Film Extrusion
- LDPE – Foam Extrusion
- LDPE – Injection Molding
- LDPE – Masterbatch
Polypropylene (PP)
- PP – Injection Molding – Copolymers Automotive
- PP – Injection Molding – Copolymers General
- PP – Injection Molding – Impact Copolymers
- PP – Pipe Extrusion – Copolymers General
- PP – Sheet Extrusion – Copolymers General
- PP – Injection Molding – Random Copolymers
- PP – Bi-Axially Oriented Film – Homopolymers
- PP – Cast Film Extrusion – Homopolymers
- PP – Fiber, Filament & Tape Extrusion – Homopolymers
- PP – Sheet Extrusion – Homopolymers
- PP – Injection Molding – Homopolymers
- PP – Thermoforming – Homopolymers
- PP – Compression Molding – Homopolymers
- PP – Pipe Extrusion – Random Copolymers
- VestolenP – Pipe Extrusion
- VestolenP – Sheet Extrusion
- PPcompound- Injection Molding
- PP CS – Injection Molding
- STAMAX – Injection Molding
- STAMAX – Extrusion Compression Molding